Occasionally debris will get caught in the housing of the rotating jets causing the jet to either slow its rotation or stop rotating altogether. This can easily be fixed by removing and cleaning the jet. Always turn the pumps off before removing any jets. After removing the jet, they can easily be cleaned by vigorously shaking the jet while submersed in water. If the jet nozzle does not spin freely after doing this, move the nozzle to the outside rotating position and turn the nozzle in the rotating pattern until it starts to bind. Move the nozzle back and forth over the binding spot until it starts to free up. Shake the jet while submersed in the water again and check for free rotation.
